Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I configured an Cisco AP 2702 on the CLI with the following CAPWAP Paramters:capwap ap ip address 172.21.144.232 255.255.255.0capwap ap ip default-gateway 172.21.144.254capwap ap controller ip address 12.149.2.52 Normaly (with other models)...
Since today, after an automatic upgrade of the Chrome Browser, we cannot access out Prime Infrastructure Systems running on Version 2.0 and 2.1 anymore. The Chrome reports an error ERR_SSL_WEAK_SERVER_EPHEMERAL_DH_KEY. Version 2.2 has no problem. Has...
I have 4 new MSEs. But on all the setup.sh script had problems to configure the eth0 Interface (it only worked after a reboot, ntp is not working after I finished the config etc.) Is there an ISO Image which I can use to reinstall the SE 3355?
Hello all,I have a problem with a WiSM2 running on 7.4.110.13. It is installed in Russia and we are trying to connect new 1600 APs AIR-CAP1602I-R-K9 for the -R Regulatory. But the AP cannot connect/join to the WLC.Product Version........................
Easier solution Create a shortcut with the command"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" --cipher-suite-blacklist=0x0088,0x0087,0x0039,0x0038,0x0044,0x0045,0x0066,0x0032,0x0033,0x0016,0x0013
An easy way to overcome this problem is to go back to Chrome Version 44 to get it work again with PI 2.0 and PI 2.1.To do that go to the directoryC:\Program Files (x86)\Google\Chrome\Applicationrename chrome.exerename old_chrome.exe to chrome.exeThen...
