About Erik Ingeberg

Erik Ingeberg · 02-28-2012

Hi,I've set up ezvpn using DVTI for both hardware and software ezvpn clients on on a IOS router. Authentication authorization (mode config) is done with RADIUS towards ACS 4.2, and this is working fine.In order to get this to work, I had to create us...

Erik Ingeberg · 10-06-2011

Hello,In ASA 8.2 and earlier, when an object was created in ASDM, a line with the "name" command and the corresponding IP was entered in the configuration. This made it possible to filter for the object in the real-time log by name instead of IP.Now,...

Erik Ingeberg · 02-03-2010

Hi,I'm configuring a pair of 6509 switches in VSS mode, and there are a number of dual homed etherchannel links (MEC) connecting to different routers, switches and servers. I plan to use a single GigabitEthernet link directly connected to both switch...

Erik Ingeberg · 11-12-2008

Cisco Security Manager is used to manage an ASA5510 with AIP-SSM-10 IPS blade.CSM is running version 3.2.1 (service pack 1)AIP-SSM-10 is running version 6.2(1)E3When I right click the IPS in CSM and choose "device manager" the "old style" IPS GUI sta...

Erik Ingeberg · 10-12-2008

Hi,I just installed CSM using the 90 day evaluation license. I currently manage a single ASA firewall, but this might change in the future, and I wanted to try out this software.I think that the software is running extremely slow. I'm having a hard t...

Erik Ingeberg · 10-27-2021

Same issue here on FMC / vFTD both running 7.0.1 and ISE 3.It was working fine when first set up, few days later I noticed it was no longer working.

Erik Ingeberg · 11-02-2017

Hi, sorry to revive this old thread, but I have the same problem. Is there any chance you could share the "Wired Phones" certificate if you managed to get hold of it?

Erik Ingeberg · 02-23-2016

Hi Michal, Time flies, it's been 5 years since I made that post. I tried to figure it out again, but I just don't have the time to do it. You are right though, the @15H6 is the offset where the scan should begin, and the response the scan is looking ...

Erik Ingeberg · 12-29-2014

We are seeing this alert as well, but we haven't had any complaints from the users.I had a TAC case in July this year due to "Application Fault Errors", and my TAC engineer told me I was experiencing bug CSCzv44813. The solution was to change to Goog...

Erik Ingeberg · 03-16-2012

I can't find anything wrong with the configuration. You mention a firewall in between? Check that the firewall allows ESP and UDP/500 + UDP/4500.

Member Since	‎11-14-2007 12:57 AM
Date Last Visited	‎06-11-2024 01:03 AM
Posts	44
Total Helpful Votes Received	20

User Statistics

User Activity

Ezvpn ISAKMP authorization (mode config) on IOS using ACS issue

ASA 8.4 ASDM 6.4 objects / names in log

VSS etherchannel mode?

Can't open IPS device manager from Cisco Security Manager

Cisco Security Manager - Slow response?

Re: FMC - Initiator User Not Found in event log

Re: Hi G,so long time ago, but

Hi Michal,

We are seeing this alert as

Site to site VPN not working between two 851s