Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm just getting back on Nexus. I have inherited several 5k and 7K, some have the mgmt0 interface set along with an associated ACL, some only have VTY set, some have both.. What is the difference ? I need to start running compliance checks and I wa...
My customer is presently comunicating to a call service provider via a GRE Tunnel over IPSEC. They chose to move all such connections to a traditional site to site VPN behind a firewall here at the corp office. Like the questions says, is it ...
I just inherited a small WAN,, been a while since I tackled QOS, can some eye the config below and see if it makes sense? My main puzzle is why the admin re-applied dscp af31 when building the policy mapThanks !!!class-map match-any priority2 match i...
My company has asked me to investigate NAC at the headquarters. I'm going over pages of quotes and information, my question - Do I need to purchase a failover bundle? If not, I assume when the NAC fails, connectivity is open, but I assume a good Smar...
Please reference this linkhttp://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20140926-bashAs per Cisco, ASA not effected, but as a precaution, eliminate if not limit ssh/htpps connections to authorized hosts until browser p...
Hmm, if you can ping the gateway for each vlan , that eliminates any firewall settings on PC. Can you ping 192.168.100.1 from any of the hosts?Did you add both vlans to the switch and router vlans database?
I once had a similar problem, ended up hardcoding the speed on the local ethernet interfaces, cleared the issue, somethign with clocking with the carrier. Don't ask me why,, worth a try?
