AllWondering if anyone can help me.I have a supernet advertisement out of a core site on a network that we manage however, I can't see how this advertising across the MPLS.There is a route-map but this only advertises statics with a specific tag, Thi...
HelloI am currently looking at an issue whereas the standby router is still receiving traffic. There doesnt seem to be any transmitting traffic seen on the LAN or WAN interfaces. I have applied IP accounting but I cant see any traf...
Hello AllWondering if I can have some help with QOS classes and their behaviours.I have a network with 2 main classes, AF1 which I know is Bulk Data and Default class. The AF1 class has 9mb of the 10mb circuit applied and default c...
Hello all,Wondering if anyone can explain/help me understand the following situation:The primary had a flap on HSRP and since recovered, however the secondary continued to flap between active > speak, speak > standby. The primary s...
Yes, it is present in the routing table and is redistributing across BGP.My question is how is this advertised when this isnt redistributed with tag set? I was wondering whether the command redistribute mobile was allowing this to redistribute across...
RichardThanks for your reply, would this tie up with the fact that we are only seeing receiving traffic over this secondary? I will check to see if the secondary is advertising routes out of the WAN that may not be advertised from the primary, to se...
HelloIts an ASR1002 and I am checking the WAN and LAN interface counters and also have netflow configured which is showing a variety of traffic passing, RDP, HTTP, HTTPS, LotusNotes etc.Thanks
Thanks for the reply Joseph I had done a bit more research and found that this is the case. I imagine that a better long term solution would be to change the bandwidth around so it was more accurate, just for the sake of records. As it does seem a b...
