Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to try out the new wireless DECT phones from Cisco, and to that end I have purchased a SPA302D kit, including the SPA 232d DECT base unit and a SPA302 phone. Still being pretty green to VoIP I figured that those being SIP-capable Cisco device...
Hi Tarik,I think you've misread my post a bit - I'm talking about the ACS as well. From a management perspective you still browse to https:// or https://, and a self-signed certificate generated by machine A cannot be valid for machine B because the...
Hi Steve,I would not recommend using self-signed certificates for WLC's, regardless of protocol. See my post above for why - EAP-FAST from a security perspective really isn't much better than LEAP if I'm honest... to make it secure you need a lot...
I agree with your theory; per the documentation that is correct.Please be aware of a gaping caveat though:AnyConnect only works with a very, very smalls subset of Android devices and absolutely will not work on anything that isn't on the compatabilit...
If you are running a routing protocol over the GRE tunnel you may not need to use GRE keepalives, but I would probably recommend using GRE keepalives anyway for the following reasons:1. The overhead caused by GRE keepalives is pretty minimal, it shou...
Mohammad is right - use a SPAN port and connect a sniffer.In regards to the output of show crypto ipsec sa, you will only see traffic sourced by and destined to your IPSec endpoints, not individual traffic that is encrypted. As I mentioned above, th...
