Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The router is 7304 and one SPA-2GE in slot2.The traffic comes in from the internet on the GE 2/0/0 and traffic is then routed to GE 1 that go to my network.Gigabit Ethernet errors, input overruns and ignored packetsWhat is the most common problem fo...
Hi All I went through the support files and found such kind of log messages during peak hours as below, 2010-07-11 11:55:47 | INFO | CPU #000 | Started filtering packets of type 'TCP Non-SYN' received on interface # 0. Reason: Started filtering due...
Hi All I went through the support files and found such kind of log messages during peak hours as below, 2010-07-11 11:55:47 | INFO | CPU #000 | Started filtering packets of type 'TCP Non-SYN' received on interface # 0. Reason: Started filtering due...
Hi gzigoto133For Broadcom ASIC based switches, this threshold is 10 MAC moves within 1 second. For Cisco Nexus 9300-EX/FX/FX2/FX3/GX/GX2 and 9500 switches with 9700-EX/FX/GX line cards, the threshold is 10 MAC moves within 10 seconds.You can find the...
Thanks !Will the system start filtering all traffic or traffic on specific CPU when only one CPU is in shortage ?What it will do if the system is in some kind of shortage and no attack is detected ?Is the shortage include cpu , memory and the others ...