Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all. I have a pair of Cisco 1841's running a site-to-site VPN between siteA and siteB with 192.168.30.0/255.255.255.0 and 192.168.16.0/255.255.252.0 respectively. All works fine between these two subnets. I am trying to add an additional subnet at...
Hi all. I have a pair of Cisco 1841's running a site-to-site VPN between siteA and siteB with 192.168.30.0/255.255.255.0 and 192.168.16.0/255.255.252.0 respectively. All works fine between these two subnets.I am trying to add an additional subnet a...
I've been trying to make this work and have had no luck. I've got a 515E running 7.0(2) and attempted to use this command to allow hosts on my 172.17.150.0/24 subnet to browse the website on 69.90.71.85 ; static (outside,inside) 69.90.71.85 172.17.15...
Hi all. This is likely a basic question, so please forgive me and refrain from telling me to RTFM I have a Cisco 6509 upon which I have several VLANs. All VLANs can see routes I add on the router that's enabled on the switch. I need to be able to...
Thanks guys, I'll have a close look at that document. I tried to do just the last "nat (inside,inside)" but then lost connection to my webserver from outside......
That's correct.My inside network is 172.17.150.0/24. The webserver is on 172.17.150.23I am trying to browse to the public IP 69.90.71.85 from a machine on the inside network. In order Pix versions, I could use "alias" but apparently that command is...
I've been trying to make this work and have had no luck. I've got a 515E running 7.0(2) and attempted to use this command to allow hosts on my 172.17.150.0/24 subnet to browse the website on 69.90.71.85 ;static (outside,inside) 69.90.71.85 172.17.1...
