Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is it possible to set up NAT translations to do the following on ourASAs?1) Have an external address (5.1.1.1) associated with an internal address (192.168.1.10)so that any externally initiated internet traffic directed to 5.1.1.1 gets redirectedinte...
We are planning to connect two local datacenters via multiple 10G metro ethernet connections from two different ISPs (6509 VSS and 7010 vPC clusters at each end),Can MEC work with 'protected' or safe 10G metro ethernet links (where one ISP provides t...
We are running UCM 7.1.2 and have a number of 7936 conference phones running the 3.3(20) SCCP firmware. They are configured/connected with a single VLAN on the switch port per Ciscos recommendations. We still see multiple 7936s intermittently rebooti...
From viewing various threads it appears the migration approach of installing Unity 4.x on a VMware server, running DIRT backup/restore to move database from existing physical servers to VMware and then installing Unity 7.02 inplace on the 4.x VMware ...
I am trying to understand in more detail what occurs when a CSS times out a flow. Looking at sniffer traces on both sides of the CSS (running release 8.2) it appears the CSS does not of itself initiate any FIN or reset of both sides of the connection...
So the CSS does not also send a RST on the server side at the same time? This would explain all the half-open connections we see from the CSS to the backend servers. Anyone have any feedback on why this is not done? This seems like a design shortcomi...
The interesting thing is that before we deleted the test CM 4.2 ports on the Callmanager, the Unity ports WERE acting as if they were dedicated to each CM instance (i.e. watching the Port Status Monitor we would only see ports 32 and down used for MW...
Yes we did. As mentioned we saw in the failover wizard log that we were failing on the table 'conflict_UnityDbPublication_Handler' not having a primary key. We deleted the table in question (per level 2 TAC) and reran FCW, and everything worked corre...
Found the Failover wizard logs - heres the error messages we see when running the wizard on the failover server:FailoverConfig,10,Creating the SQL articles for 'UnityDbPublication'FailoverConfig,10,Error [0x80043708] : [Microsoft][ODBC SQL Server Dri...
