Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Between two datacenter sites we have a WAN connection provided by a local Telco and routing between sites is using BGP.We also have a layer 2 fibre end to end connection between the datacenters for diversity, although this fibre link is not part of t...
Hi,I currently have a single internet router which is multi-homed to 2 x ISP's.Eventually we plan to add a second router for greater resilience etc, but just for now we have a "warm spare" router which we can use in the event of a failure.Currently, ...
I have two ASA5520's with ASA-SSM-10 modules which are running Cisco Intrusion Prevention System, Version 6.0(6)E4. These are located at two different sites (one is local and the other remote from where I am based) and so are not running failover.I u...
I have a question about BGP pre-pending that I am hoping someone might be able to help with...I have an internet connection to an ISP A (single homed) where we advertise multiple Class C networks.At the same location I also have another internet conn...
When I delete a device out of CiscoWorks (deleted from Common Services) my Inventory Collection reports the the following 1.Deleted Device - 11Device name not available. Device may be deleted2.Deleted Device - 10Device name not available. Device may ...
I think I found the problem...
http://www.cisco.com/c/en/us/support/docs/field-notices/640/fn64080.html
It looks like i will need to upgrade to version 7.1(11)E4 or later
Hi Arjun,
Did you manage to solve this issue?
I have a similar problem and am running IPS Version: 7.1(8p2)E4 which was working fine and then failed about 8 weeks ago and I have been subsequently updating the signatures manually.
My error message is...
Thanks guys for your recommendations...I just want to get a little more detail to move forwardWe have a pretty minimal setup with a router at each datacenter. The current primary connection currently runs E-BGP via a local Telco and most of our traff...
Hi John, thanks for your questions.Yes, you are correct I have 2 x connections to ISP A and 1 x connection to ISP B and ISP B would only be used currently if both connections to ISP A are down.ISP A made some updating of policers on the interfaces co...
