Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Forgive me for I know this is probably Routing 101.I know it has to do something with routing, but can't seem to figure out why it isn't working.PIX Version 7.1(2)!hostname PIX515Edomain-name LEDUC.LOCALenable password KImMvv.HAzqvR6HP encryptednames...
I have a home network using a 2600 and PIX515E, and unfortunetly I don't know how to set up ACLs. I read a few Cisco documentation but unfortunetly I am unable to grasp the concept of how to define them. Would anyone be able to give me a crash course...
I've got a 2600 that I am wanting to connect to my cable modem. However I don't have the knowledge to get it running. My ISP uses a dynamic IP and I am unable to get it to connect.ROUTER#show runBuilding configuration...Current configuration : 685 by...
I am unable to ping my computer (attached via crossover). I can ping from the PC, but not from the PIX515. I'm using ethernet 1, and I have its IP set at 192.168.1.2/24, but for what ever reason I am unable to contact the computer. I tried messing wi...
I have a 2600 that I am wantign to use at home. Problem is that I believe I need a module to add another fastethernet port. I am wanting to hook it up to my cable modem and as the 2600 only has one ethernet port I can not do this. I asked on another ...
Jcarvaja,Its actually an old iprism I picked up off ebay for $10 shipped. Its now running linux , therefore the commands are going to be different.Its actually pretty damn cool :Mines running Ubuntu server 11.04, using it as an ssh server, web filter...
Forgive me for my ignorance, But the filter works fine on its own, meaning if I plug up a workstation to eth1 (192.168.0.1) and give it a static IP it passes throguh traffic and responds to pings.Okay so basicly I need to ssh into my filter and add a...
Just to be clear, I will won't be able to ping 192.168.0.2, although I should be able to ping 192.168.0.1I added the above with no luck:: Saved:PIX Version 7.1(2)!hostname PIX515Edomain-name LEDUC.LOCALenable password KImMvv.HAzqvR6HP encryptednames!...
I'm removing the 2600, as it doesn't serves a purpose anymore. I still cannot ping 192.168.0.2. Here is my current config: Saved:PIX Version 7.1(2)!hostname PIX515Edomain-name LEDUC.LOCALenable password KImMvv.HAzqvR6HP encryptednames!interface Ether...
