Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
TCT devices register fine over Any Connect VPN until I upgraded to 9.5! After upgrade IM/P and Voice Mail services connect successfully over VPN but phone service indicates it fails to get configuration from server.Everything works locally. Any idea...
I am looking for clarification on the number of VMW-UC-STD-K9-1A required to support C series server. My understanding is the VMW-UC-STD-k9-1a will support 1 server with two physical CPU Sockets....since C series only have 2 CPUs I should only need...
If a packet is received with BOTH COS and DSCP markings which QOS label is used as a basis for selection of the egress queue and threshold….COS or DSCP? Is it possible to control this behavior via configuration?
Is it possible to upload files via SSH direct to CUCM 7.x for service by TFTP. In other words without using the Call Manager GUI TFTP file management, instead use a SFTP client/server to transfer files to proper directory on CUCM TFTP server. Thank...
I have been wondering if it is possible to enable the EGRESS priority queue on an interface AND also limit the bandwidth used by that queue. Assume I would like to limit the priority queue to 25% of interface bandwidth for the purpose of this discuss...
I opened a case with TAC they are stating I must upgrade my ASA from 8.3.X to minimum 8.4.1 per release notes before they can pursue the issue any further. I have not upgraded my ASA yet to see if this alleviates the issue. They did review the co...
Thanks Chad, I do have that document but it was not clear on how the egress selection was made when both COS and DSCP are present. I do have two other questions if I may!1. The documentation for INGRESS states.“Therefore, the Dscp−inputq−threshold ...
