Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I will be installing a pair of MX84s for a customer soon and there is interest on Cellular backup. How do I need to tackle this? Reading the docs, it seems pretty straight forward on getting the MX connected but had some questions as I have obviously...
I have configured a Win2k16 server with NPS to authenticate admin access to a pair of ASA 5516Xs. My configuration works fine for ssh access to the ASA but when I attempt to access the ASA with ASDM, authentication fails.
aaa-server RADIUS_GROUP pr...
I have 2 new ASA 5505s 8.2(5) that I have an established VPN tunnel however there is no traffic passing over it. Cant figure out why...
ASA 1
show isa sa
ASA1# show isakmp sa
Active SA: 1Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA durin...
It appears that my L2L VPN config was good all along, I just didnt know it. I went on site yesterday, both locations are quite a drive and tested traffic on actual hosts on each inside network. The tunnel passed traffic as expected. I just got faked ...
I tried my ping from the management interface, still no love. I found some info on Cisco website about some buggy behavior on 8.2(5), I have upgraded both units to 8.4(7), same story. I am going on site to try to generate some traffic from devices on...
