Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!What is wrong with the code below?? I just want to access two RDP servers with the same public IP. I tried to use the port (33890) to differentiate each other. But did not work =/ nat (outside,inside) source static any any destination static in...
I was wondering if I will not compromisse the users sessions VPN (anyconnect), that is, close their conections if I change some Server Group (Radius) parameters on ASA:ciscoasa(config)# aaa-server AuthOutbound protocol radiusciscoasa(config-aaa-serve...
Hello everybody.I am having some trouble when lots of users try to connect via Anyconnect on my ASA (5545-X).At the peak some users complaints they cannot authenticate and I see these messages flaping on logs:%ASA-2-113022: AAA Marking RADIUS server ...
Fala pessoal,Alguma maneira prática de adicionar uma mesma access-list em dezenas de roteadores e switches Cisco?? Está tudo sobre mesma gerência, com mesmo user/pass.Obrigado
Hei @Mark, it was me.So, in fact I thought it could be the same problem, we did not solve it yet, but it is appearing to be some application issue.I keep this post updated when we finally solved the question.Thankss
Hi @Neno, i guess you are right. It´s something other than some ASA problem.Actually, after some working on that, we figured out that is caused probably by an application code/platform problem.My ask about changing the RADIUS attribs that ASA sends, ...
So, it is usually about of 400 total users. I think that are not more than 10 users accessing the Radius at same time on peak hours. The Radius runs on a Windows 2003 platform.I've changed the timeout and the problem appears stopped.But I also noted ...