Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Pros,I have a Cisco Linksys PAP2T-NA internet phone adapter which was working fine for almost a year. It suddendy stoped working and as I can see on the device power LED is blinking like this (---- O O ) means it's on for 2 ms and then blinking ra...
I've found that my clients can NOT access to my ASA 5510 with their Cisco VPN Client Ver 5.0 through IPsec over UDP.By comparing my new running config with the old one I found some strang following configuration:svc enablegroup-policy DfltGrpPolicy a...
I configured every thing in both site, there is a connection between my sites BUT I can't access my resources from SiteB with it has RV042.It also showes that it connected to my ASA in SiteA but there is no trafic between sites !!!I don't know what ...
Hi Portuquez,Thanks for your really quick respond. Here is the outputs:Group Description: Rcv'd: Group 2 Cfg'd: Group 1Mar 14 11:57:33 [IKEv1]: Phase 1 failure: Mismatched attribute types for classGroup Description: Rcv'd: Group 2 Cfg'd: Group ...
Hi Sankar,How can I make some changes in my Backup files and restore it again.I want to remove my following configuration:svc enablegroup-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec What should I do ?
Hi Auraza,I have ASA5510 Ver 8.2 and someone before me configured it as a VPN server for Cisco VPN Client Ver. 5.0.06 (IPSec Over UDP) I've tried to make a new SVC web-vpn (without any configuration now!) and after that nobody can access to my netwo...
