Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,I just set up a read-only profile for my ASAs. However, I'm not able only to use the function "Built Filter" in "Real Time Log Viewer". As you can see the attached image, I can't see the OK button.I'm using ISE, thus, the solution is setup ...
Hello there. Pretty simple question. I'm planning on using a S170 as a default gateway for a specific network. The topology is attached. Can it be done or the S170 is not capable of handling protocols other than http?
Hello all.Pretty straight forward question: Is that possible to allow the access to a specific Facebook page while blocking everything else? Something like: www.facebook.com/cisco.Thanks.
Hello there. Quick question:Both rttMonJitterStatsOWMinSDNew and rttMonJitterStatsOWMaxSDNew are showing random numbers in the end of the OID when I SNMP walk them. I'd like to understand what those numbers stands for.Thanks!
Hi there.I have a Webauth setup in my switches which is working fine. I'm trying to redirect authenticated users to a specific pages, but it is not working. I'm running c2960-lanbasek9-mz.122-55.SE3.bin and I configured the following lines:ip auth-pr...
Hey Ken, Just as I suspected. We're planning on using this to supply a small guest network. I'll manage to use wccp or L4 redirection to get it working then. Thanks for your time!
Hi Mike, Thanks for your reply.I'm trying from a Windows 2008 Server and from an ASA 5585, both directly connected to this 5555x. There's a fact here: On the Windows machine, the trace is completed, but I never see the hops, like this: 1 <1 ms ...
Hi all,I'm facing the exact same problem. I'm using asa914-smp-k8.bin. I followed all the configs here and the problem still happening. I can perform traceroute FROM the firewall, but from anything behind it, I can't traceroute to internet. I'm attac...
