Hello,Do you guys know if its possible in the ace to limit connections from a specific host?For example. if host X does Y connections to one of the vips on the ace, it will be blocked.
Hello,I have a setup with Cisco Network Registrar. We have a few scoops with the lease time set to forever. Now I want to reconfigure the scoops to have a 24h hour leasetime. But before this I would like to clear all the current leases. I have proble...
I have a problem when adding users to ip phone messenger. I add the end user enter username password and pin but that user cant login to the ip phone messenger. What more do I need to do before a user can use phone messenger? The first user I created...
I have tried to set up Ip Phone Messenger in a lab environment. I have followed every step in this configuration guide: http://www.cisco.com/en/US/docs/voice_ip_comm/cups/6_0_1/install_upgrade/deployment/guide/dgcucm.htmlThe problem is that the serv...
I did not get it to work. I had to delete each lease in the subnet manually. I suggest you use the batch command to do it. Just go to the local/bin folder where the cnr is installed and issue the following:nrcmd -N username -P password -b <"PATH TO F...
I have tried your solution but the cli does not like it. With subnet number I have tried all different ways to specify the subnet I want to use force-available on but It wont work. the "subnet-number" is the subnet I want to clear right? What format ...
Hi, writing from a diffrent account.The load is around 1% we are testing with jmeter tcp sampling. But you can see the different when you are surfing around the site using firefox/chrome/explorer so its visually diffrent. We can also see that the SSL...
