Bought an 8945 from eBay trying to get working in my home lab and it won't register. Packet captures show its requesting SEP<macaddress>.cnf.xml.sgn which tells me I need to delete the CTL/ITL file. When I press the settings button (the cog wheel) ...
In my case we weren't using touch panels, so the error was telling me exactly what was wrong. No touch panel was detected when the SystemUnit MenuType setting was set to Indicators, i.e. indicators were being forced by that config setting. Changing...
Go to Configuration --> System Configuration and search for indicators in the upper left search box. This will bring up the SystemUnit MenuType in the Experimental section. Change the setting from Indicators to Interactive.
I was eventually able to reset the phone through the Administrator Settings, but I had to use a power-brick for that menu option to be available. As I mentioned in my original post, while on POE on my home lab network, Administrator Settings was mis...
For some reason while on POE on my lab network I couldn't get to Administrator Settings. Using the power-brick unlocked the Administrator Settings and I was able to initiate a reset from the menu. I'll take it back home and connect to my lab and it...
