Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
With my Nexus 5K's I can useaaa authentication login default group XYZ localto allow local authentication if tacacs XYZ group is down. With my new Nexus 7710, once I enter a group name the "local" option is no longer availalbe, only another group na...
Need step by step to setup FC connection over DWDM with 10DME cards. Keep getting error about internal patch cord at destination no not connected when doing the client connection.
We are migrating a large application to a new serverfarm one folder at a time. the exiting applicaiton server is not loadbalanced via the ACE.We want to set a vip on the ACE as the primary DNS entry for host ans.company.com. When users requrest ans...
I have a configuration in which I have a PIX learning the default route from a Internet BGP gateway Router via OSPF. Inside the network I have a router connected to the inside of the PIX and learning the route via OSPF. Is shows up as an External r...
I have a PIX running 6.2(2) code and the 3.5.1 vpn client. I can set up different vpngroups that use the same local ip pool fine. But if I create a second ip pool and assign a vpngroup to use the new pool they hang at the "securing connection" entr...
Thanks for the input. We found the problem.We were creating an OCHNC connection between the 10DME cards, then trying to create the FC OCHCC. The OCHNC would come up fine but the OCHCC kept failing with an error about an internal patch cable missing...
