Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have recently migrated an MGC 50 v9.3 PRI to a Cisco ISDN GW.The issue I am running into is that the ISDN GW will not dial outbound over the PRI, but when I switch the PRI back to the MGC, outbound dialing works fine.There are no prefixes establish...
Paolo,One issue I have run into many times with the VCS 7.x upgrades is that the web interface is not refreshing correctly. I will perform an upgrade, it will all look good and then at the last minute it will fail.It seems to fail when sending out t...
To add to what Magnus stating, there are other considerations. If you have a VCS in play and are using any SIP or provisioning services that would require TMS to have TMS Agents or the replication agents turned on, as well as any VCS clustering that...
In TMS 13.x, perform the following actions:Login to TMSGo to Phone Books > Manage Phone Book SourcesIn the middle of the screen select "New"Give it an appropriate nameIn the Type field, select the dropdown and choose "File Based Phone Book"Be sure th...
TMS supports SMTP relay to send information concerning TMS related events. Specifically:"Mail server access: Cisco TMS requires access to an SMTP server to be able to send email. Your company's existing mail servers can be used for this. Note that C...
SIP authentication typically occurs over port 5060 (TCP, UDP, SCTP) or securely over 5061 (TLS) as per RFC3261 regarding SIP as a transport.Cisco follows these same standards and refers to the ports used for SIP communication in the Jabber Video Admi...
