Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Community
My customer is evaluating to configure Direct Routing with Microsoft and i was planning to propose Cisco CUBEs since it now supports ICE-Lite which is required for media optimization.
However, when doing some research and reviewing the l...
Hi Community I couldn't find an official Cisco document confirming that on the ISRs 43XX or 44XX we can do NFAS with more that 4 T1s. I am working on a project where we will be installing 1 x 4331 with 2 x NIM-4MFT-T1/E1 cards. Total we will have 8 x...
Hi FolksI understand this question is kind of bizarre taking into account that almost everybody has moved towards Jabber. However, for my customer it will take some time yet to have jabber as a softphone ready in its environment which leads me to val...
HiCan anybody from Cisco provide more details about this bug? What was the context under which this bug was found?The license server it refers to is the Smart License Server?Does it only happen when we have box-to-box redundancy and only on the stand...
Bonjour
I am looking to validate whether the CUBE Enterprise has the capability to reroute a call through a different dial-peer (which points to a different destination) based on a specific response returned by the primary target destination. Let me...
Here my final understanding after additional review
Cisco CUBE supports only ICE-Lite. it will never ask a STUN server in the internet what its public IP and port is. The CUBE will only reply to queries for media optimization requests with its real I...
There is a way to do SIP Profiles with NAT, but this is not related to my question, since when an endpoint supports the ICE framework, it is able to ask a STUN server (in the internet) what public IP and port is using for an specific call and then up...
NithinThanks for pointing to the link below.. It mentions "Use of a single D channel to control up to 10 PRI interfaces can free one B channel on each interface to carry other traffic. Any hard failure causes a switchover to the backup D channel and...
Thx for the reply Mohammed and Nithin Here what the release notes for the CIPC says about the versions of CUCM that supports it. In the screenshot we don't see CUCM 12.5 even though everybody who has a LAB or access to a CUCM 12.5 system can see CIPC...
