Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello guys,I was studying WCCP and i saw this command but i am confused about its use.According to DOCCDhttp://www.cisco.com/en/US/docs/ios/ipapp/command/reference/iap_i2.html#wp1088737"If no WCCP services are configured with a redirect ACL, the serv...
Hi Guys...i have a pretty good understanding in multicast technologies, but today i ran into some doubts...The thing is:- When we have sparse-dense mode configured and the router does NOT know a RP for a particular group, it would fall into dense mod...
hi mate,I guess you dont have any service policy attached to the tunnel yet, right ?If you dont have you can create something like this, very simple setupCreate a class map that matches a ACL with any host to the monitoring server and vice versa. The...
Some restrictions...Restrictions for All Supported Platforms The following restrictions apply to the bandwidth command: The amount of bandwidth configured should be large enough to also accommodate Layer 2 overhead. A policy map can h...
HI mate... We''ll do tuneling whetever we need to carry 2 vlans at the same time.In the example you showed, they guy is doing port channel (layer3) - So he used just a simple tunnel to carry the traffic, no need for do1tq tunnel in this case.cheers
