About josedelpino

josedelpino · 10-07-2016

Hi guys! Quick question about licensing. Recently we bought a couple of c800 routers with advanced ip services, in the output of "show version" everything seems fine Router#show versionLicense Information for 'c800'License Level: advipservices Typ...

josedelpino · 04-11-2013

Hello Basically after upgrade from ASA 8.4 to 9.0 (2) I have problems when certain types of NAT.Example:ASA 8.4: nat (LAN, outside) 85 10.252.253.123 source static 192.168.3.2 192.168.3.2 192.168.3.104 static destination service http http In thi...

josedelpino · 04-29-2012

Hi guysBasically I'm working on a project that is to implement redundancy in a small ISP in my country, currently there is only one switch cisco 2950 and 2651XM router, the idea is it to be this way:Some time ago I ask what technology could be used t...

josedelpino · 04-12-2012

Hey guys Currently I need to implement a redundancy scheme consists of two roads one primary and one secondary, basically the idea is that if you drop the primary traffic go by the secondary This is the first time I do something like this, so I'm loo...

josedelpino · 02-10-2012

Hi all Basically yesterday I install a demo of a license SSL_VPN, when I use the command "# show license" shows me this: 3 Feature Index: SSL_VPN Period left: 8 weeks 4 days Period Used: 0 minute 0 second License Type: Evaluat...

josedelpino · 03-20-2021

Yes, is supported but you need an adapter "CVR-QSFP-SFP10G". You can check SFP compatibility with TMG: https://tmgmatrix.cisco.com/?npid=137

josedelpino · 10-01-2019

"Would the second statement have an acl that is "access-list PBR_ACL_2 extended permit ip any any" so it would process my more defined network first and send it out ISP1 and then take anything after that matching any any and send it out ISP2?" This i...

josedelpino · 10-01-2019

Hi wee_g2004, The Nexus 5600 modules are hot swappable, the only exception that I am aware is if it's a L3 module. This are the instructions:https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/hw/installation/guide/n56k_hig/chap4repl...

josedelpino · 10-01-2019

Hi fjulianom, I also think that stacking is simpler and easier to maintain that vPC, however the problem with stacking is that is not the best when it comes to redundancy. When you use stacking all switchs share a single control plane, this means t...

josedelpino · 09-27-2019

Hi pochtaliot, I have a similar experience with switches of the small business line. The problem was caused by the "Smartport" functionality. I will suggest that you look into it.https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-bu...

Member Since	‎01-16-2012 11:07 AM
Date Last Visited	‎01-31-2024 12:13 AM
Posts	27
Total Helpful Votes Received	31

User Statistics

User Activity

Cisco c800 licensing

Problem with NAT ASA 9.0(2)

wasted addresses with HSRP

Redundancy and path selection

VPN_SSL License

Re: 40G Ethernet Expansion Module (PID: N9K-M12PQ) support which SFP

Re: Cisco ASA PBR

Re: Nexus 56128p module install

Re: Stacking on Cisco Nexus switches

Re: No DTP but states are changed automatically