Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I am trying to do PPPoE on a range of C-Tag (QinQ inner vlans) on 7606 with ES+ card. This is quite easy on the 7200/7300 series routers, as such: interface GigabitEthernet0/3.2528 encapsulation dot1Q 2528 second-dot1q 100-200 pppoe enabl...
Dear AllWe are trying to do PPPoE on our 7600 with ES+ card, but it doesn't support it. What card do we need for terminating PPPoE sessions? Any advices will be appreciated. Cheers.Jing
Hello, I am having troubles with mapping DSCP to COS for PPPoE frame on CAT3560/3750. The switch is blind of DSCP value of IP packet within the PPPoE encapsulation. I guess, because of the extra PPP header, the IP packet is too "deep" for the swit...
Dear All, We are looking for buying a 20GE port 7600 ES+ Card. However, there are a few different models, we are not sure which one is the right one. We will be using this card for Metro Ethernet Termination, MPLS VPN, EoMPLS, QoS (Marking, CBWFQ)...
Dear All,We are constantly having the following warning on our ASR 1001. We are not sure that these warnings mean.===================================== Oct 26 09:37:10.335: %PLATFORM-4-ELEMENT_WARNING: SIP0: smand: RP/0: 5-Minute Load Average valu...
You will need something like below:interface GigabitEthernet0/0/2 service instance 1 ethernet encapsulation dot1q 100 rewrite ingress tag pop 1 symmetric bridge-domain 1interface GigabitEthernet0/0/3 service instance 1 ethernet encapsulation dot1...
Hi Joseph, Thanks for you input. However, SVI will not help in our case. Our scenario is, for example, we have two Metro Ethernet backhauls from two different providers, they provide the connectivity between our network and our customers. They del...
Thank you, Inayath. Just would like to ask a few more questions: 1. We are running WS-F6724-DFC3CXL, when we the following problem when configuring same vlan on different interface. interface GigabitEthernet1/1.10 encapsulation dot1Q 10 ip add 192....
Hi Ivan, That explains it, as we recently instaledl the 5GE card (SPA-5X1GE-V2), it seems that this problem started afterwards. So, apart from the reload, do we need to uninstall the card? Would the card be working fine after the reloadThank youRegar...
