Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,looking for configuration documents on how to deploy EAP-TTLS on the video endpoints? the only info I got so far is how to enable and disable EAP-(tls/md5 or ttls) on the endpoint and manual upload certificate's.Looking for more deployment guides ...
Hi,
The "aaa group server radius" suggest the request goes to the first member of the group. In my case server1
however server3 get most of the request's
Is there something I overlooked?
HW: WS-C2960-24PC-L
SW: 12.2(58)SE2
Below the config.
Th...
Hi, I try to implement a primary backup scenario with the GSS. My customer is afraid the traffic goes to the backup datacenter if there is a small problem in the primary Datacenter, e.g. if just the web server is rebooting.I have 1 webserver in Prima...
Hi,Got servers in vlan 10 ip range 10.0.0.0 and servers in vlan 20 ip range 20.0.0.0 at the same layer 3 switch. (c6509 sup720)I would like to block TCP traffic initiated from Vlan 20 to Vlan 10.But the servers in Vlan 10 needs to be able to open an ...
HiThe following redirect is not fully working the way we would like to have it working.owner company content redirect-80-to-443 vip address 1.1.1.1 protocol tcp port 80 url "/*" add service redirect active!service redirect keepali...
Hi Hslai,
Did try 15.0.2-SE11 but same issue did adding some probing and retry times.
Believe the issue is related to my template.. Depending the order of "radius server server" it behaves different. as below.
Appreciate your help and document if...
Hi hslai,
This document also explains my point? below a quote.
''When there are multiple RADIUS servers defined on the NAS, the default behavior is that the non-dead server that is closest to the beginning of the list is used for the first transmis...
