Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
If you have solved the following issue before then kindly give me a clue:The VPN3005 has only been used a few times in the test lab, when suddenly it begins to refuse any attempts to make config changes - both CLI and Web. It also outputs the followi...
I had a opened a case with cisco on this (Case# D240540) but was closed while I was on sick leave.Here is cap-up of the problem with pppoe over Fastethernet on the Cisco 3640 router. Essentially, we intend to use one of the 2 Fastethernet ports on th...
Please ignore. I've resolved the issue by myself using password recovery.http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_password_recovery09186a008009434f.shtml#topic1
... also ...- remember the implicit deny any statement -add the following line to your ACL to permit remaining traffic (NB: there should always be at least a permit statement in an ACL):access-list 101 permit ip any any
