Hi Everybody,i posted the same Problem in Sept 04 without any solution. So once again:on two Cisco1760 with an Serial Leased Line and a ISDN Backup (bri1/0 configured as backup interface for Serial0/0) i got the following result for a mibbrowse:ifInd...

Hello Everybody,on a Cisco1760 with an Serial Leased Line and a ISDN Backup (bri1/0 configured as backup interface for Serial0/0) i got the following result for a mibbrowse:ifIndex ifDescr ifAdminStatus ifOperStatus11 BRI1/0-Physical 5 ...

Hi everybody,on a WS-C3550-12G with IOS 12.1(14)EA1a i configured "ip flow-export". When I do this, the device reloads by itself, i think when it tries to export the netflow cache.The last message is:Unexpected exception to CPU vector 0, PC = 59EF48-...

Hello all,i use a C2611XM in our Backbone. Version: IOS (tm) C2600 Software (C2600-IS-M), Version 12.2(13b).At the Fa0/1(and only there) we use "ip route-cache flow". In Combination with "ip flow-export" we get an unrealistic sum of bytes passing thi...

Hi everybody,i have an 1760 with two WIC-1B-S/T and 12.2(7.1)T. I have configured both BRI's as "dialer pool-member 1". When connecting the ISDN NT to bri1/0 the Dialer brings up the interface and everything's fine. When connecting the ISDN NT to bri...