About s_colombo

s_colombo · 04-17-2013

Hi all ,I'm looking for some advices to make a possible configuration for a customerThey need a device to provide :- firewalling- bandwidth limiting based on protocols, IP, users- web content filtering- good reporting to see which device/users are co...

s_colombo · 09-11-2012

I've the following questionA customer is implementing a dual uplink path to internet , a service provider will bring two separate link with two public addressing and two routers , and asked to provide a solution to manage the dual path in this way :-...

s_colombo · 09-10-2012

Hi AllI've the following question regarding how to implement a DR Site.We are to be able to offer a DR site for our customers .The Basic Idea is to link the customer's site and our DR site through a VPN based on ASA appliancesAt the customer site a s...

s_colombo · 04-19-2010

We have set up a L2L VPN between a cisco 877 and an ASA 5505.On the 877 side we have :dialer 0 : connect to internet and has a dynamic IP given by ISPLoopback1 : has a static IP from the assigned Public IP range .Vlan 1: has a static private IP for t...

s_colombo · 04-12-2010

Hi ,I have the following problem.A BO with a cisco 870 with dynamic ip addressing by the provider for . and a cisco ASA5505 with static public ip address.I need to set up a L2L VPNThe BO has the following public addressing : 85.20.132.x ( for dialer...

s_colombo · 09-14-2012

Hello Varun ,thanks for the links .I looked at them and found that if we do not need PBR but simply redundancy we can even use an asa , is that correct ?If we decide to go for a router between the asa and ISPs routers ( to use pbr ) would a 1921 be ...

s_colombo · 09-12-2012

Hi ,thanks for the link you provided , it's very usefulI have a questionGiven the configuration in the example , how can I add an asa behind the PBR router ?I mean , I need to create some static NAT for publishing some servers ( ie mail servers ) on ...

s_colombo · 09-12-2012

hi , can you provide links to l2 over l3 reference architecture and documentation ?I need to start looking at which hw can provide such functionalitythanksSent from Cisco Technical Support iPad App

s_colombo · 09-11-2012

Unfortunately the connectivity must be through internet as we have to provide it as a service for our customersWe need to create , possibly , a L2 tunnel for VM replication and DR without having to reconfigure IP Addressing and routingThanks

s_colombo · 05-06-2010

Pepe_n ,thanks so much for your help.It was exactly my case, disabling IP CEF worked finebest regards

Member Since	‎02-10-2008 02:11 AM
Date Last Visited	‎10-09-2017 02:09 PM
Posts	44

User Statistics

User Activity

QOS by protocol on ASA 5512-X

Multiple uplink path with ASA

How to strech LAN across Data Center over internet

cisco 877 - crypto map problem

L2L cisco 870 and ASA 5505

Re: Multiple uplink path with ASA

Re: Multiple uplink path with ASA

Re: How to strech LAN across Data Center over internet

Re: How to strech LAN across Data Center over internet

Re: cisco 877 - crypto map problem