Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have users that are no longer able to access apps via Metaframe through our WebVPNThese users are using the Java Client for Metaframe. This was working until recently. The error they receive refers to an expired cert.The most significant recent c...
I have been trying to setup some SNMP monitoring on a Catalyst 4503 without success. I have added a snmp-server community string on the device, but I am unable to communicate with it via SNMP. As I understand the community string is all that is need...
The web interface of my admin locked up just a litle bit ago. I was working on TFTP'ing some files and the admin stopped working. Right now I think connected users are okay, but I cannot start the admin or connect using the WebVPN. Any ideas? Tha...
I am working on setting up vlan trunks as well as LACP bundles on two Cat 6506 ports (running 8.3 CatOS) to connect to a dual nic on a VMware server.The trunk works but LACP doesn't seem to be running across the link. I have followed the Cisco docs ...
I am adding a failover firewall to our network. Our ISP has a 30-bit subnet for our outside network connection. One IP address for there router and one for my firewall. To add a failover firewall should I ask my ISP for a 29-bit subnet for the ext...
Antonio,It would seem you put some work into your config and it has been helpful for me - our design is very much like yours. Thank you!How did you deal with the 6500 to 6500 trunk to prevent a loop? Did you implement GLBP?All the best,Don
Thanks for your reply! This problem was resolved by using a single-tiered cert (we used GeoTrust, there are others - EnTrust, etc.) We also found that the Citrix client needed to be at the most recent version.Thank you, Don
Thank you for replying to my question.I am able to ping and I have double-checked my settings/strings. I also tried using snmp on some other switches which worked.Here is some other info, which is interesting. I'm using IOS version 12.2, but I found...
Thanks Patrick!I wasn't sure what else to do either, so I had a chance to reboot this weekend and did - the web interface is back!I appreciate your help! -Don
Thank you for your reply! I tried the steps you laid out for me and, unfortunately, it didn't work. If you have any other ideas, I would apreciate it.Thanks again,Don
