Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 4400 and a 5508 WLC in the same location We want to be able to roam between ap joined to both the 4400 and the 5508 using only one ssid Do I only need to create a mobility group and add both WLC then create only one WLAN on one of the contro...
We have several 5508 controller with 1142n access points some access points unjointed from the controller and do not rejoin. It is not always the same access point and it does not happen in any order we can find. All access points may stayed joine...
We are using wireless controller 5508 and 1142n apWe have all the wireless configured on vlan 36 the dhcp server is in vlan 1 At present we have the management port on subnet 32 vlan1And it seems to be working it see all the access points and we are ...
We have a test lab setup usingDHCP server = windows 2008WLC = 5508, AP=lap1142nswitch = cisco sg300vlan1= 10.10.10.0vlan128=10.10.128.0vlan160=10.10.160.0The server is in vlan 1 with dhcp scopes setup for vlan 1, 128 and 160The wlc is connect to the ...
Yes that is the bug Glad to here they may a fix for this bug I will give the code a try then use your config instructions to give it a try. Thank you for your help
We are at version 7.3 We had to downgrade the WLC from 7.4.100 because of a problem with 1142n access points locking up. Do I have to be at version 7.4.100?
