Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all,i've got the last asa1000v and last pnsc and trying to register.i've got this error:Error opening Private Key /mnt/disk0/privKey.pem1399:error:02001002:system library:fopen:No such file or directory:bss_file.c:356:fopen('/mnt/disk0/privKey.pem...
Hi all,i've got UCS blade with n1k as dDVS with a channel mac pinning.Now i want to force all vMotion IFC to have preference for UCS fabric A so that vMotion traffic dosn't go outside UCS.may i do it in a port-profile (vMotion one) or do i have do d...
Hi guys!Question quite simple, i think .may i put n5k in npv mode if i've connected to the 5k a UCS in npv mode?it will be like a npv chain:UCS npv --> n5k npv --> Brocade switchtnx/danilo
Hi all,i've got a UCS (cluster) connected in vPC mode to a Nexus 7010.Running on UCS blade VMware ESXi 4.1U1 and N1K with PC EHM, UCS NIC is 71KR.Question is what happens if both uplink of one Interconnect fail? I mean maybe fibre cut or stuff like t...
Hi Robert,i'll confirm.net control policy is not shut link (my conf). do you think is better to shut and let vem reroute all? any issue in no shutdown link?i've red somewhere that with n1k and vmware, cisco doesn't reccomend fabric failover....or i'm...
Ok Jennifer right tnxit works (maybe sometimes yes like this time have look belove e maybe sometimes not) but it is not supported.TEST# show conn3 in use, 20 most usedTCP dmz 15.0.0.1(9.9.9.1):23 inside 7.7.7.8:43544, idle 0:00:02, bytes 463, flags U...
Hi,it works properly with 4.0 update1 (but i think also with ESX4.1)I've installed last version of VEM (in accord to compatibility matrix)In advanced options of vCenter i've added vNic that have to be seen as LSI device (direct path)nothing more, i n...
OK,i'll try.So firstly install right version of VEM manually (my case)second install plugin on vcenter (downloadd from UCS)third configure UCS for connect to vcenterthen configure direct pathtnxdan
