Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, We are having Cisco 4500 switches running in VSS mode. Currently VSS links are connected on ports with capacity of 1 GB & we wanted to replace those ports with new 10 GB DAC cable. We manage this switch remotely via SSH. If we disable VSS link or...
Hi,We are having SIP trunk for Enterprise LYNC Voice functionality. The LYNC servers are behind ASA firewall. when the call is initiated traffic comes via SIP trunk to firewall & then to LYNC servers & to users using LYNC client on system. We are fac...
I am having couple of Cisco 4500 switches running in VSS mode with IOS-XE Version 03.04.01.SG RELEASE SOFTWARE (fc3)I am facing high CPU on both Core CPU on the switch , i am not able to detemine the exact problem. Please help me to understand whats ...
Hi, We are having Cisco WS-C4506-E switch running on old IOS. we need to upgrade IOS of this switch.Can anyone please tell me how to upgrade Cisco 4500 series switches ? Show module information as below - Chassis Type : WS-C4506-EPower consumed by ba...
Hi All, We are having Cisco 4500 switch running on (cat4500e-UNIVERSALK9-M), Version 03.04.00.SG RELEASE SOFTWARE (fc3) with ROM: 15.0(1r)SG7.Recently we were having issue with WAN links flap (OSPF neighbor) , The WAN links connected on Gig ports & ...
Hi John, We are also having simmiler issue. WiFi users MAC moving between different Wireless controllers (as different APs registered on different controller) causing High CPU on 4506 switch (where WiFi VLANs created & Controllers are connected) near...
Hi Karthik, The QOS is already configured on EDGE switch where the SIP trunk & firewall connected. the call flow works fine but facing issue only connecting for the 1st time.
