Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings, I am having an audio issue after a power outage over the winter break. I now have no incoming audio via CME 8.6 over our TW PRI. We are using a 3945 running 15.1(4)M4 with a VWIC3-2MFT-T1/E1 and a PVDM3-128. ISDN seems fine and calls con...
I am preparing for an upgrade and P2V conversion of all UC applications(CUCM-8.03, UC-7.1.5.3., UCCX-8.0.2.1 , MP-6.0.6, CER8.0.1.). We are currently running on MCS7800 series servers that would be unsupported as per the matrix if upgraded to 8....
I have LMS up for a few weeks now and I am trying to minimize/filter certain events such as:HighUtilization::Component=IF ComponentClass=Interface;ComponentEventCode=1056Even after turning off all High Utilization events in events sets of DFM I am st...
Thanks for the info Clifford. Seeing some of the same issues using pcd_vApp_UCOS_11.0.1.20000-2_vmv7_v1.2 trying to get from 8.62 to 11. Please keep us updated.
Javalenc, Thanks for your quick response and you are correct about the support. I am still concerned with running into the same issues we had on our previous upgrade as far as cisco "supporting" the hardware but the upgrade software being unable to a...
Aaron,Thanks for the response. In our environment we need to know exact room numbers from where the call is being made and and want the callback # to be from that specific device so the way it now, each switch port has a specific ERL/RP with specific...
We are an education institution somewhat in the same boat. We currently using CER 2.03 have 3000+ phones all of which have unique ELIN's as well as ERL's using phone tracking with locations (Room numbers) listed per port. Everything is working as it ...
