Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm working on a multi-cluster UCN design and am wondering if this scenario will be supported. The attached diagram describes the scenario. The question is when a VMN user sends sends a message to the Corporate Domino Address of a user (SMTP Proxy ...
Hi, I was able to create a VM for CUCM 8.0(2c) with VMWare Server by using the recommended specs from the OVA file. However, I can't get the hardware right for the installer to allow Unity Connection to run. I used the settings from the OVA file (s...
We need to use G.729 for users checking voicemail with Unity Connection. See attached diagram, which should make the scenario more clear. The CUBE config only allows for explicit config of G.729a or G.729ab, but not G.729:! G.729abcodec preference...
I typically use 1XXXX for system numbers, but I have a situation where we need to use [1-8]XXX for user extensions. I don't want to simply lower the inter-digit timeout and use 1XXX. So, I see my obvious option as:Use 1[235]XXX for system numbers a...
Hi all, I recall there having been some issues back in CUCM 4.x with SIP Trunks not supporting G.729 when requiring RFC 2833 for DTMF. Does anyone know exactly what the requirements are with CUCM 8 for SIP Trunking with G.729 if RFC 2833 DTMF is req...
For the Phone Number with AD, you can only sync with telephoneNumber or ipPhone. If you can't get either in the correct format, you'd need to create a Translation Pattern to convert the number to the proper format for dialing, but that may cause oth...
I'm just posting an update to this. I have tested it and found that Unity Connection does not search the Proxy Addresses of other clusters when processing messages. So, what needs to happen is to configure the Unity Connection clusters to forward u...
5* for you Marcus. Thanks for the screenshot. I was able to get this working on VMWare Server. The keys to getting it to work were using RHEL 4 and 80GB Dual HDD. Got errors when either of those wasn't configured.
Well, this is precisely why ERLs get unique DIDs, which should NOT be Extension Numbers used on the phones! This is specified here:http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cer/8_0/English/administration/guide/e911c42.html#wp1045755This ...
Dean, it is interesting that you state that moving devices causes manual upkeep of the database. Are you using Automatic Phone Tracking, or have you manually entered the phones? With automatic phone tracking, no manual intervention is required for ...
