Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are deploying a Call Manager 7 system and we are configuring mobility. We have been asked if there is a way for the call manager to not ring the remote destination when the user is on the primary line on his/her phone.
I have cme 4.1 running on a 2851. I have configured some 7921s on the router. When they boot the firmware upgrade fails. Below is the code.tftp-server flash:APPS-1.0.3.SBNtftp-server flash:CP7921G-1.0.3.LOADStftp-server flash:GUI-1.0.3.SBNtftp-ser...
We have changed the max calls and busy trigger to 2 / 1 and 1 / 1 and the remote destination still rings if the user is on a call on the phone. We don't want to change the max calls and busy on the line on his phone b/c we would like to still have c...
Yes we did.The phones had not actually upgraded from the factory firmware. I upgraded them to 1.0.1 and it upgraded. It wouldn't upgrade to 1.0.3 after that. We then upgraded to 1.0.4 and then to 1.0.5 and they are working great now. I added some...
