Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Went round the download section quite a bit through firewall, NGFW, Firewall with firepower services.... not able to find it.Grateful if someone can post the link. Or someone from TAC can publish it. My CCO: rjugnauth.Thanks,Ravi
Anyone who worked with the SUP6 Lite and knows the caveats? I used a Bundle: WS-C4506E-S6L-1300.It looks like you can't do 10G with the default LAN Base image. However; there's a Licence upgrade on the LAN Base for 10G. There's also an IOS upgrade to...
Have to access MS CAS-client server for remote mail access.Natted the CAS from DMZ:172.30.1.32 to 172.26.1.32. Same for mail server on the insideFrom the routers, i can ping both servers natted address(172.26.1.32&102)Connected to the outside of ...
IPS module(ASA-AIP-10-INC-K9)installed on ASA 5510.Shows up with 'sh module 1' command. Module has been stopped, reset, reloaded; several times. But still shows: 'Recovery Partition Version 1.1 - 5.0(2)'. Doesn't fetch image from TFTP server, when re...
Got an ADSL router, C837 freezing and needs manual reboot. Got the router replaced by different brand at different interval, and they go in the same behaviour after a week or so. The same C837 has been deployed elsewhere n working fine. Any chance th...
Hi,Been trying to clarify the features; looks like the SUP7-E has not been added as main platform on Cisco Feature Navigator. What I'm looking for is the support of EIGRP on the Universal or IP Base Image. I used the latest available; which is SUP6-E...
Didn't test with the servers' name. I only pinged the IP address using port 443. behind both ADSL n C1841 Frame-Relay, i'm not using public IP. I nat them again(this time with the public IP)on the Frame router.Is the 'http inspect' still in cause? Co...
Hi Kumar,Nothing showed on the logs, and CPU utilisation pretty low. Even with one single machine connected from inside; at time the DNS itself is not resolved. It appears more like the router is unable to forward the packets correctly. From other so...
