Module stuck in recovery and doesn't pull image from TFTP

[rjugnauth]

IPS module(ASA-AIP-10-INC-K9)installed on ASA 5510.Shows up with 'sh module 1' command. Module has been stopped, reset, reloaded; several times. But still shows: 'Recovery Partition Version 1.1 - 5.0(2)'. Doesn't fetch image from TFTP server, when recovery process is done. Thx for looking into it; didn't find any helpful doc.

[brispin]

I think there could be a problem with your TFTP server. Make sure that the server is reachable from the IPS.