Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 - Nexus 5548's connecting to a 3750x stack. I'm trying to bring up a trunk between the a Nexus 5548 and the master switch. The trunk will not come up. Is the native Vlan a requirement? Below is what I currently have configured. I have t...
I have a question on if the Native VLAN needs to be allowed on the trunk port? Below is an example:switch Avlan 310 name MAN!vlan 333 name NATIVEinterface Port-channel2 description * MAN EtherChannel * switchport trunk encapsulation dot1q switchport...
I need to create 2 separate VLAN's on one 3560 which needs to also hand out DHCP. This will be an isolated network. The user's need to be able to communicating between each other. I have setup up the 3560 in the following manner. Ports 1-12 are c...
Hi,I currently have 2 ACS server's running ACS v4.2 with PEAP. I am doing self-signed certificates on the ACS. What I am trying to configure and test is the redundancy portion of having 2 radius servers. I have both server's configured on my WCS (...
Problem: when the receptionist is on line 1 and a call is received the caller hears 5 rings before the receptionist hears 1 ring. It appears that the configuration isn’t allowing for the call to go to the next free extension. Configured: 4 extens...
LAN Name Status Ports---- -------------------------------- --------- -------------------------------1 default active Gi0/1, Gi0/210 VLAN10 active Fa0/1, Fa0/...
I connected 2 clients to the device; one in each VLAN and the user's weren't able to ping each other. Here is the final config that I used. Any suggestions?ip routingip dhcp excluded-address 192.168.10.250 192.168.10.254ip dhcp excluded-address 192...
