Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am getting this message, and I can't find anything to help resolve it. Any suggestions? Thanks,The limit of Infrastructure/Ad-Hoc Rogues the system can track has been exceeded, new rogues may not be tracked
Is there a way to have the AP get its configuration from the WLSE? Sort of like, phoning home. I have found that it is possible by adding the correct strings to DHCP requests, however, I have locations that don't use DHCP. I would like to put a cou...
Thanks for the information. I tried that, but it did not resolve my issue. I finally found some information that fixed it. The problem was that the number of ad-hoc?s exceeded the 5000 limit of rogues. By using the following link, I was able to c...
If it is the first time you are accessing it:Username: AdministratorPassword: setupIt should then prompt you to configure it and change the password. Hope that helps.
Are you trying to do user authentication with the Novell LDAP using the WLSE, or are you trying to get the traps from it? User authentication will require a Cisco ACS (or another security server) to talk to the Novell NDS. Please explain what you w...
This is an issue I have fought with because of the use Novell. You have to login to the workstation first, then the wireless, then Novell. Novell is expecting a network connection to talk to the Tree, if it is not there, you won't be able to connec...
Why not use the old router to do DHCP (Assuming you control the router)? That may be the quick easy fix. Here is a sample config. Hope this helps.ip dhcp pool DHCPPOOLnetwork 10.0.0.0 255.255.255.0domain-name dns-server default-router 10.0.0.1netb...
