Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
A client of mine has corporate clients setup with 802.1x authentication. Is that sufficient and secure by itself. I Would like to put these users in the DMZ and ensuring LAN access via VPN (authentication using acs / ad integration) be a better desig...
When I schedule a job (non-immediate), e.g. a netconfig job to add snmp community string, I get the error message" CFG0021: Could not create job. Possible cause: Cannot submit jobs for approval. Approval emails cannot be sent".I have the correct smtp...
Company A & B merged. Company A has Server Farm as 10.2.0.0/22 address space. Company B has Server Farm as 10.3.1.0/24 space. However Company B's remote Sites fall within the 10.2.0.0/22 space. Company A & B are connected using VPN tunnel. Company B'...
I am working on integrating two company networks. An interim soln, due to ip address collision, would require doing Static NAT, Dynamic NAT & NO-NAT. Network A to Server Farm - Static NATNetwork B to Server Farm - DynamicNetwork C to Server Farm - NO...
Looks like the return traffic is NATTed on the way back. Make sure you have a nat 0 access list with source ip as your lan addresses and destination ips as your vpn client ip pool. Hope this helps.
If you are running EIGRP, under EIGRP type inno split-horizon eigrp ; where x is the as #.Also, if your dmvpn routers have default routes ie 0.0.0.0/0 pointing to the ISP on all routers that is ok. IF you have specific static routes for DMVPN hub pub...
Jon,(firewall edited config attached))In order to complete the aforementioned design, I need the PIX firewall do the following (example subnets: NYC is 10.2.0.0/22; Boston Hub: 10.1.10.0/24 & Boston Remote Sites 10.0.0.0/8 (note that Boston remotes a...
One final request regarding the same. Could you also find out about the concurrent routing i.e. static nat with route-map stating that this nat applies for only certain source and destinations (using specific deny statement first and general permit f...
