Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Not sure if this is the proper forum, if not apologies. After generating a new Crypto key is the key stored in a file on the 4500 and if so what is the fikle name ? Anauditor wants us to centrally store all keys and certs. I disagree as generating ne...
Morning all -Syslogging from various older switches (2950, 3500,3650, etc) to a GFI syslog server works. Cannot get the 4510's to work. Shows messages being sent to the server but Wireshark confirms the packets do not arrive at the Syslog server.In e...
Good Morning All One of our sites just failed a PCI scan for not blocking ICMP type 13 and 14 packets (timestamp). The firm that conducted the scan also is asking us to turn off IDS and allow unrestricted access to their external IP address. I am inc...
Good MorningI have a multi site WAN,MPLS primary and secondary circuits, 6 sites. One site is the data center. The DC is moving so we have a bridge (2 3800's) connecting the server VLAN (10.2.5.x) while we migrate servers between sites and want to ke...
And the problem was - traffic WAS being sent to the server but showed a VLAN Virtual IP (server VLAN) as the source. The traffic we expected to see, and the IP we were sniffing, was from the loopback address which was on a different VLAN.
Sorry for the delay. Running 12.2(25). I spanned the switchport of the Syslog server which is in another switch. The logging traffic from the 4510 was not making it that far. I'll try segment by segment to find the loss point.Thanks for your help...
Hi AndrasYes logging is on, the Syslog server is pingable and traceroute returns the expected path. I have attached a log file with the sh logging output.thanks
