Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello together,
I am faced with the challenge that our customer wants to migrate his FMC installation from VMware to Hyper-V because he has switched his entire server infrastructure to Hyper-V. Unfortunately, there is currently no documented and supp...
Hello,I've configured DCHP Relay at the FPR1140 via FMC, how it is decribed in all documentation, but it doesn't work. The DCHP Relay statistics are emtpy. Then I've removed the DHCP Relay configuration and have the FPR configured as DHCP Server. Unf...
Hello,
after updating our WLC 7500 from version 8.0.100 to 8.2.100.0 funkioniert the VLAN mapping on the APs no longer reliable. This means that the client can authenticate the AP, then get an IP address from the DHCP server associated values. If we...
Hello,we have upgradet our AnyConnect Client from V3.0.4235 to V3.1.03103. After the upgrade, I can me authenticate with RSA. After authentication, the AnyConnect will startup the connection but it failed with the error message "VPN connection termin...
Today I was able to successfully migrate from VMware to Hyper-V using the workaround.
The first step was to switch the platform to VMware_300, run the migration tool and then switch back to Hyper-V.
Then follow the migration path by deregistering th...
Thank you very much for the quick reply. I will be doing the migration this way soon. I was able to change the hardware model this way. Attached is an updated list of the possible hardware models:
To reset this Secure Firewall Management Center for ...
The switch hasn't an IP address in the vlan. I have pinged from the first FPR CLI to the second FPR. The packet goes over the switch. The FPR interface is an inside interface with serveral sub interfaces. Only one sub interface, here the vlan 1119, n...
I've used this manual, but it doesn't work. The client is connected to a switch and this switch is connected to the firewall. When I ping the HA IP interface address from FW1 to FW2, the HA address answer and I can see the MAC addesses of both FWs an...
