About ebussink

ebussink · 04-30-2013

I'm curious to see if anyone has been able to use UCS Service Profiles with C-Servers (via Nexus 2232PP FEX and C240M3 server) to manage a Windows Server install that has a non-Cisco PCIe device. I need to add a PCIe custom interface (like a PCIe Fax...

ebussink · 05-22-2014

Thanks Jeremy, I was able to use this and increase the fnic_max_qdepth to 128. I also put four vHBA in the Service Profile. Makes for a nice screenshot.

ebussink · 06-13-2005

Here are my problems when upgrading to 7.0.1-2 on a PIX515E-Restricted.1) PIX515E was connected on the outside to a 2950, and both devices where forced into Full-Duplex, but I logged on the switch CRC errors on the packets, those went away when I mov...

ebussink · 06-13-2005

Hello,I've done just that this weekend. I've upgrade my PIX-515E-Restriced (32mb) to a PIX-515E-Restricted (128mb) with the 128Mb upgrade. All is fine.Regards,Erik

Member Since	‎06-13-2005 02:01 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	5

User Statistics

User Activity

UCS Service Profile on C-Servers & 3rd Party PCIe devices

Thanks Jeremy, I was able to

Re: Problems after upgrade from 6.3(4) to 7.0(1)

Re: Memory for 7.0