Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I use Cisco 7961 in SIP version with headset. How to configure phone to automatically answer calls but only when the Handset is active (only when the HEADSET LED is green). At this moment, the phone automaticly answer a call on the Speaker too. B...
Hi,In one of my network I have few SPA942 and one SPA504 with console SPA500S. Asterisk is 1.4.22. After connecting to the network console SPA500S I have a small problem.The console works fine but there are many such messages:[Jun 13 09:42:46] WARNIN...
Hi,I have a problem with Cisco 7911G phone.When turn on the the power at the moment the red lights are flashing and after it lights up only one green "Applications Menu".The display shows nothing.The phone does not get any address from a DHCP and TF...
Hi,The interface to which the 7911 is connected to is configured ocrrectly because the green light comes on LAN.In the same interface and the nasme cable 7961 works ok. Originally on SRP521W is vlan1 for data and for voice vlan100.Accordance with the...
I use a SIP server (Asterisk).3 phones with SIP FW (2x7961G and 1x7911G) are connected to Cisco SRP521W. Only with 7911G is problem. Power is from an external cube.TFTP server is on Windows (TFTPD32)7961G connects to the TFTP correctly but 7911G no. ...
Hi,I checked the all settings of vlan on my router but the phone is still "dead". On the phone is only one green led "Applications Menu" and the display is totaly blank. I do not have the vlan option on my switch. Is it required?Maybe there is some o...
