Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a single host that I want to static nat a number of services to. I want to use service object groups to simplify commands. I guess the beginnig is:object-group service OG-SERVICES-INSIDE-MYSERVER service-object tcp destination eq ftp servi...
Hi, we have users connecting via an ISP Wan-link to our ASA with inside-subnet 192.168.1.0. The remote users are on 192.168.2.0 and can only access 192.168.1.1, no other IP on the 192.168.1.0 subnet. Any idea why?The (ISP) router and 192.168.2.0-subn...
Hi, I'm trying to configure an 1142N AP + 2960-S + ASA5505 with wireless, vlans and trunking with no success. DHCP is provided from my DHCP-server on the inside. Here's my config:Thanks/SamAPversion 12.4no service padservice timestamps debug datetim...
Hi, I've previously used trunkports and vlans between my ASA and accesspoints, connected directly. Now I want to put a 2960S-24PS-L bewteen. Where should i define the vlans (in the switch or in th ASA?) and what ports to put in trunk mode? (the ones ...
Hi, please give me a working config with least amount of code for:IOS post 8.3Subnet: 192.168.1.0 /24Static NAT (from any source) to server 192.168.1.100 and allow the same incoming connections on outside interfacePorts: TCP 20,21TCP 80UDP 50000-5002...
Ok, thanks for your replys. How do I configure this?And, just to be clear: I do get ping-replys from 192.168.1.1 from the 192.168.2.0-subnet, but on no other addresses. And I can't access any other host/port/service in the 192.168.1.0-net, but I can ...
Ok, my bad. I've changed all the native vlans on the routerport and switchports but it's still not working. I'm suspecting something with the AP-configuration? Not getting any DHCP-adress and no connectivity when I use a static address...
Ok, but naming it BVI80 is necessary?And I thought natives vlans was created for giving the AP an adress that is in the management subnet (vlan 10?) I've done this before without the switch inbetween.
