VLAN+trunk (2960+ASA+AP) question

[Samuel Eng]

Hi, I've previously used trunkports and vlans between my ASA and accesspoints, connected directly. Now I want to put a 2960S-24PS-L bewteen. Where should i define the vlans (in the switch or in th ASA?) and what ports to put in trunk mode? (the ones on the switch or the one between the switch and the ASA?)

Thanks/Sam

[srereddy]

Exact setup as mentioned in the bwlow url. Replace router in this url with ur firewall.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml#ISR

HTH.