Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
If not already set try setting your speed and duplex on the interface. duplex full speed 100 or speed 1000 depending on what your gig port is connected to.
I have double NAT running and working great, here is pretty much my running config from my Router 2821 and ASA 5505.My setup.ISP ----> 2821 -----> ASA5505 ------> FTP ServerCISCO ROUTER 2821; Gi0/0 (ISP) Gi0/1 (10.10.10.1) interface...
Issue with ASDM previously working then misteriously one day it stops working and your unable to connect to it. Is directly related to a java update, I downgraded from Java Version 7.5 to 6.4 and I am successfully able to connect to my ASA again.Here...
I had the same issue on my Catalyst 2960 with switch port fa0/24 which was connected to a WRT54G wireless router running DD-WRT v24-sp2 VPN.I ran the following commands and resolved my issue.CiscoSW1#conf tEnter configuration commands, one per line....
