Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,The above error is seen in a debug whilst trying to connect a Panasonic Wireless Projector to an AP. The encryption on Radio 0 is set to wep mandatory and I am using mac authentication just for the projector. Is there any way that an exclusion...
Trying to run DHCP snooping on a 2960. Using DOT1X to assign PC's into VLAN's for healthy, quarantine, guest etc but only VLAN 1 has an interface and IP address assigned.When trying to use the "ip dhcp snooping vlan XXX" command the VLANs are shown i...
Hi,Is there a way to export then import the Campus Manager Device Discovery Seed Devices file after sorting the file into a list of devices in numerical order? Also need to do this with the CM Campus Data Collection VTP Domian file to sort this also ...
Did you find a solution to this problem as I have a similar issue with a Panasonic projector.Clients cannot be changed and use wep mandatory getting the wep key from the ACS. The projector has got to be static wep so even with different ssid's and vl...
Thanks for the reply.The AP is not controller based and the LAN card is fine as the issue is present with different laptops.I resume since the Projector cannot respond to EAP requests and no MAB is possible on the AP then the solution will not work i...
Have seen similar problems here when remote devices, particularly AP's have been turned off before the data collector see's the devices as known.I usually ping the device to ensure it is reachable and then click on the checkbox for the devices and do...
