Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Windows 10 using CLI Analyzer 3.6.6. I'm unable to use certain features such as clicking on CCO Login or Packet Capture, I received the attached error.
Multi-site network spanning various locations in UKSite A has 10Mbps connection to site BSite B has 1Gbps connection to data centre (site C)Site A is a small office of less than 5 users. They use Thinclients and PCoIP to establish VDI sessions to se...
Please someone put me out my misery and help solve this issue!
Hardware = N5K-C5672UP running 7.1(4)N1(1)
Objective:
To redistribute a default route from iBGP (in a VRF named INTERNET) into EIGRP (in another VRF named NV)
Problem:
It does not work!...
Can someone confirm if IP SLA is supported on Nexus 5672UP running 7.1(4)N1(1)?
I've come across some old forum posts that state it wasn't available a few years ago but not sure if that's changed since.
The Cisco Feature Navigator tool doesn't includ...
Looking at the attached diagram, we have 3 sites which are connected in a triangle for resilience. There're different link speeds between the sites.
Site A and site B have two separate links that connect the sites together.
One link is currently op...
Thanks for the response.I have tried with and without the proxy and the same error occurs. I have direct internet access via our corporate firewalls during this screenshot
I had actually tried increasing the queue-limit and ran this all of yesterday (to 128) and the user's advised yesterday was the best day they'd had since the issue started. I didn't use random-detect though.
I have removed the increased queue-limit...
It worked!
The BGP route was redistributed into EIGRP after adding in the additional route-map (match route-type internal) command.
I did however have another issue afterwards which needs looking at:
All internet bound traffic was routing via the N...
