Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Platform is a WS-C2960-48TC-L. Began by troubleshooting CRC errors on our COO's drop. Interface configuration is a Fa port that was forced 100 Full. He was still getting errors after I replaced both the drop and patch cord. To rule out premise wiring...
I have some strange behavior on the trunk interface of an ASA. This trunk is carrying traffic for 5 vlans on a 2960G switch. I believe the L2 decodes are occurring because of vlan traffic sourcing from the switch that is not configured on the ASA. Th...
It does function without error when I configure in the manner you suggested. I've always forced on the switch and utilized a-duplex and a-speed on client side to prevent half duplex negotiations. This is the first instance where the client side has n...
Anndd you're both correct. To rule it out I forced 100 Full client side. Errors disappeared. So it seems that I'm dammed either way. What is the best way to prevent half-duplex negotiations happening when you can't force on the client side ? This is ...
The other ports that other users machines are on are all configured at 100 Full. I do this to avoid half-duplex negotiations. Additionally, the functional port that I moved him to on our other switch is forced 100 Full and is non-erroneous. I can als...
The other ports that other users machines are on are all configured at 100 Full. I do this to avoid half-duplex negotiations. Additionally, the functional port that I moved him to on our other switch is forced 100 Full and is non-erroneous. I can als...
I do think this would be very helpful. GNS is a great tool; however, since cisco changed the ability to download IOS images and placed portal restrictions that only allow software downloads of devices you carry support on it is difficult to use this ...
