Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
In PI3.0.2 I can't found how to setup the polling interval on the devices for the ICMP Reachability Status. By default a Ping is sent every 5 minutes but this delay is too long and I want to reduce it to 1 minute. I've tried to modifiy the parame...
Hello, I am using CWLMS 3.1 with RME 4.2.0, the RME inventory works fine for every switches in the network except for the 2 Catalyst 6509. The IOS version used on these devices is s3223_rp-IPBASEK9-VM, I have no problem with the SNMP community and ot...
Inside CWW6.1, Ciscoview application works fine with a catalyst 4506, but the "Show command" and "Threshold Manager" doesn't works with this device, a message "unsupported device" is displayed. However, in the release note the catalyst 4506 (OID 1.3....
The AP1100 graphical view can't be launched in CVIEW 5.4 with CWW 6.1.A message "CVIEW INTERNAL ERROR" is displayed. The package used is the version 1.0 from the WEB and the AP1100 SNMP settings are OK.
Hello,Yes the waas software are upgradable directly from the central manager in Admin/Software management. The central manager needs to be upgraded prior the other appliance.
The problem is solved. I've loaded the "nmidb.1.0.082" package and with this package the "Threshold Manager" and "Show Command" works correctly. This package add the new devices to the Ciscoworks Windows application.
The latest package (v 7.0) is used and the device expanded view is correctly diplayed. I've plugged in a protocol analyzer and the exchange between the Ciscoworks station and the Catalyst 4506 (with show command or threshold manager) stop immediatly ...
No, I've found the solution afeter several test. I've also made this test with an AP1200 and the result is the same. If you want a graphical Ciscoview display, you need to configure one unrestricted SNMP RO community in your device. Or the bypass is ...
